Nghiên cứu chế tạo vật liệu compozit Fe2O3/TiO2 từ xỉ titan ứng dụng hấp phụ Pb2+ trong môi trường nước

Các tác giả

  • Trần Văn Chinh (Tác giả đại diện) Viện Hóa học - Vật liệu, Viện Khoa học và Công nghệ quân sự
  • Nguyễn Thi Hoài Phương Viện Hóa học - Vật liệu, Viện Khoa học và Công nghệ quân sự
  • Lã Đức Dương Viện Hóa học - Vật liệu, Viện Khoa học và Công nghệ quân sự
  • Phan Thanh Xuân Viện Hóa học - Vật liệu, Viện Khoa học và Công nghệ quân sự
  • Phùng Khắc Nam Hồ Viện Hóa học - Vật liệu, Viện Khoa học và Công nghệ quân sự

Từ khóa:

Xỉ titan, Hấp phụ, Kim loại nặng, Compozit

Tóm tắt

Trong nghiên cứu này, vật liệu compozit Fe2O3/TiO2 được chế tạo bằng quá trình sunphat hóa xỉ titan, nung ở 600 oC trong 2 giờ và nghiền bi trong 45 phút. Kết quả nghiên cứu cho thấy quá trình hấp phụ Pb2+ của vật liệu Fe2O3/TiO2 tuân theo mô hình đẳng nhiệt Langmuir và mô hình động học biểu kiến bậc 2. Vật liệu compozit Fe2O3/TiO2 tổng hợp được có dung lượng hấp phụ Pb2+ cực đại là 82,63 mg/g ở pH = 7, và là vật liệu có tiềm năng được ứng dụng trong hấp phụ loại bỏ Pb2+ từ môi trường nước.

Tài liệu tham khảo

Fu, F. and Q. Wang, "Removal of heavy metal ions from wastewaters: a review". Journal of environmental management, 2011. 92(3): p. 407-418.

Mehta, D., S. Mazumdar, and S. Singh, "Magnetic adsorbents for the treatment of water/wastewatera review". Journal of Water Process Engineering, 2015. 7: p. 244-265.

Mahapatra, A., B. Mishra, and G. Hota, "Electrospun Fe2O3-Al2O3 nanocomposite fibers as efficient adsorbent for removal of heavy metal ions from aqueous solution". Journal of hazardous Materials, 2013. 258: p. 116-123.

Poursani, A.S., et al., "A novel method for synthesis of nano-γ-Al2O3: study of adsorption behavior of chromium, nickel, cadmium and lead ions". International Journal of Environmental Science Technology, 2015. 12(6): p. 2003-2014.

Tang, W., et al., "Ultrafine α-Fe2O3 nanoparticles grown in confinement of in situ self-formed “cage” and their superior adsorption performance on arsenic (III)". Journal of Nanoparticle Research, 2011. 13(6): p. 2641-2651.

Xu, Z., et al., "As (III) removal by hydrous titanium dioxide prepared from one-step hydrolysis of aqueous TiCl4 solution. Water research, 2010. 44(19): p. 5713-5721.

Smith, Y.R., et al., Sulfated Fe2O3-TiO2 synthesized from ilmenite ore: a visible light active photocatalyst. Colloids Surfaces A: Physicochemical Engineering Aspects 2010. 367(1-3): p. 140147.

Van Tran, C., et al., Low-cost fabrication of Fe2O3/rutile nanocomposite from Ilmenite ore: a highly effective adsorbent for removal of arsenic in aqueous media. Advances in Natural Sciences: Nanoscience Nanotechnology, 2019. 10(1): p. 015014.

Tran, C.V., et al., Effective Removal of Pb (II) from Aqueous Media by a New Design of Cu-Mg Binary Ferrite. ACS omega, 2020. 5(13): p. 7298-7306.

Duan, S., et al., Effective removal of Pb (II) using magnetic Co0.6Fe2.4O4 micro-particles as the adsorbent: synthesis and study on the kinetic and thermodynamic behaviors for its adsorption. Colloids Surfaces A: Physicochemical Engineering Aspects, 2015. 469: p. 211-223.

Ho, Y.-S. and C.-C. Wang, Pseudo-isotherms for the sorption of cadmium ion onto tree fern. Process Biochemistry, 2004. 39(6): p. 761-765.

Tải xuống

Đã Xuất bản

01-11-2021

Cách trích dẫn

[1]
C. Trần Văn, P. Nguyễn Thi Hoài, D. Lã Đức, X. Phan Thanh, và H. Phùng Khắc Nam, “Nghiên cứu chế tạo vật liệu compozit Fe2O3/TiO2 từ xỉ titan ứng dụng hấp phụ Pb2+ trong môi trường nước”, J. Mil. Sci. Technol., số p.h CBNCT, tr 125–131, tháng 11 2021.

Số

Chuyên mục

Nghiên cứu khoa học

Các bài báo được đọc nhiều nhất của cùng tác giả