Research and design of a waveguide sum-difference comparator for monopulse radar applications
DOI:
https://doi.org/10.54939/1859-1043.j.mst.110.2026.55-62Keywords:
Monopulse radar; Sum–difference comparator; Waveguide; E-plane slot coupler; H-plane slot coupler.Abstract
This paper presents the research and design results of a waveguide sum-difference comparator for monopulse radar applications. The proposed sum-difference comparator is designed to meet the requirements of wide bandwidth, low insertion loss, and high port isolation, while maintaining good amplitude and phase balance across the operating frequency band. Ku-band monopulse radar systems demand waveguide combining networks with high stability and low loss to ensure accurate generation of sum and difference signals. Conventional waveguide T-junction–based comparators are typically limited in bandwidth and exhibit insufficient port isolation, which can degrade monopulse tracking performance. In this work, a Ku-band 4×4 waveguide power combining and dividing network based on a hybrid configuration of H-plane and E-plane slot couplers is proposed for monopulse radar applications. The H-plane slot couplers are employed to achieve in-phase power combining, while the E-plane slot couplers provide phase inversion and enhanced port isolation. Full-wave electromagnetic simulations are carried out using the CST Studio Suite to optimize the geometrical parameters and ensure compliance with the design specifications. The proposed design offers a compact, robust, and high-power-handling solution suitable for Ku-band monopulse radar front-end processing systems.
References
[1]. Yi Liu, Hu Yang, Yan He and Jiang Zhu. “Compact monopulse sum-difference comparator based on double-layer substrate integrated waveguide”. Electronics letters, (2017).
[2]. R.V. Haro-Baez, J.A. Ruiz-Crus, Juan Corcoles, J.R. Montejo-Garai and J.M. Rebollar. “A New 4x4 rectangular waveguide short-slot coupler in 3D printed technology at Ku-Band”. MDPI, (2020).
[3]. Yuanxi Cao and Sen Yan. “A Dual-mode SIW compact monopulse comparator for sum and difference multi-beam radar”. IEEE Microwave and wireless components letters, (2021).
[4]. Yang Chen, Yuehang Xu, Liulin Hu, Wei Tong and Ruimin Xu. “A broad Passive monopulse comparator MMIC”. IEEE Microwave and wireless components letters, (2017).
[5]. Jaber Moghaddasi and Ke Wu. “Planar 1800 hybrid coupler with non-interpersed ports for millimeter-wave applications”. International journal of microwave and wireless technologies, (2019).
[6]. Veljko Napijalo and Brian Kearns. “Multilayer 1800 coupled line hybrid coupler”. IEEE transactions on microwave theory and techniques, (2008).
[7]. M. Nasri, D.Zarifi and Uz Zaman. “A wideband 3-db directional coupler in GGW for use in V-band communication systems”. IEEE, (2020).
[8]. Ralf Beyer and Uwe Rosenberg. “Compact top-wall hybrid/coupler design for extreme broad bandwidth applications”. IEEE, (2005).
[9]. Guendalina Simoncini, Perderico Alimenti and Roberto Vincenti Gatti. “Single-ridge waveguide compact and wideband hybrid coupler for X/Ku-Band applications”. MDPI, (2022).
[10]. Jongmin Lee, Changil Choi, Sungmin Noh, Sangpil Lee and Jinho Jeong. “Compact Ku-Band Monopulse comparator using offset two-step rectangular-prism-based Magic-T”. IEEE, (2025).
[11]. M. Mohammadi and F.H. Kashani. “Planar eight port waveguide monopulse comparator”. Progress in electromagnetics research, (2009).
[12]. Hemant Kumar, Girish Kumar, Yogesh Verma and Prashant Kumar Mishra. “Compact waveguide monopulse comparator at Ka-band for monopulse tracking”. IEEE, (2016).
